Assembling sets for standard collectors TS 300, TS 500
Assembling sets for flanged connections for TS 300, TS 500
Use for: TS 300, TS 500 with flanged pipe connections.
● Basic set for flanged connections (inlet to collectors on the bottom left side, outlet on the top right side)
● Basic set for flanged connections REVERSED (inlet to collectors on the bottom right side, outlet on the top left side)
● Extension set for flanged connections
Flanged compensation set for TS 300, TS 500
Recommended use: in collector fields with 6 or more collectors TS 300 with flanged pipe connections and TS 500. The width of the collector field will increase 100mm.
Contains two compensators and two connecting clamps. Connection to the neighbouring collector is provided by extension assembling set (Ord. No: S4019), which is not included in compensation set.
Assembling sets for standard collector TS 330/M
Use for: horizontal collector TS 330/M with flanged pipe connections.
● Basic set for flanged connections (inlet to collectors on the bottom left side, outlet on the top right side)
● Basic set for flanged connections REVERSED (inlet to collectors on the bottom right side, outlet on the top left side)
● Extension set for flanged connections
Flanged compensation set for TS 300, TS 500
Recommended use: in collector fields with 4 or more collectors TS 330/M with flanged pipe connections. The width of the collector field will increase 100mm.
Contains two compensators and two connecting clamps. Connection to the neighbouring collector is provided by extension assembling set (Ord. No: S4019), which is not included in compensation set.
Soldering assembling sets
To be used for: TS 300 and TS 330/M collectors with ø18×0,8mm copper pipe connections.
● Basic set (soldering)
● Extension set (soldering)
Assembling sets for collectors with union nuts connections
● Basic set for collectors with union nuts connections (inlet to collectors on the bottom left side, outlet on the top right side)
● Basic set for collectors with union nuts connections REVERSED (inlet to collectors on the bottom right side, outlet on the top left side)
Assembling sets and vacuum adapter for collector TS 400
● Basic set for vacuum collector TS 400 (inlet to collectors on the bottom left side, outlet on the top right side)
● Basic set for vacuum collector TS 400 REVERSED (inlet to collectors on the bottom right side, outlet on the top left side)
● Extension set for vacuum collector TS 400
● Compensation set for vacuum collector TS 400
● Vacuum adapter for vacuum collector TS 400
Compensation set for vacuum collector TS 400
Recommended use: in collector fields with 6 or more collectors TS 330/M with flanged pipe connections. The width of the collector field will increase 100mm.
Contains three compensators and connecting clamps. Connection to the neighbouring collector is provided by extension assembling set (Ord. No: S4016), which is not included in compensation set.
